MT03066, LiFePO₄-compatible: the standby charger Pro protects the starter battery from deep discharge caused by standby consumers such as alarm systems or radios. It continuously monitors the RV and starter batteries and feeds excess charging current, for example from solar panels, into the starter battery. Suitable for all RV batteries, including modern LiFePO₄ batteries, the standby charger Pro is ideal for off-grid camping or extended periods of inactivity.
Intelligent battery maintenance: the Standby Charger Pro protects your camper's starter battery from discharge due to high power consumption from using the radio or opening doors. It offers automatic battery maintenance, is easy to retrofit and is compatible with lithium (LiFePO₄), AGM, gel and lead batteries. With IU charging characteristics, adjustable charging voltage values (12 – 14.5 V), an 8 A charging current and overheating protection. Parallel operation is possible.
All-round charger with professional featuresThe charger MXS 5.0 is equipped with the latest technology, which previously was only reserved for CTEK professional units. This charger solves plenty of battery problems; it is perfect for those with the highest demands.Battery capacity: 1.2 – 110 Ah, up to 160 Ah for trickle chargingFunctions:COLD/AGM: charging in cold weather and charging AGM batteriesRECOND: maintenance charging of deeply discharged batteriesAUTO: fully automatic for optimal charging12 V: for all lead-acid batteriesStep 7: fully charged batteryStep 8: maintenance charge
Universal AC-DC Charger
The chargers from the SMART CHARGER series are equipped with state-of-the-art microprocessor technology to meet the demands of daily use. It is e.g. suitable for motorcycles, cars, etc. Depending on the model, up to 9 charging stages can be completed. During battery diagnosis, it is checked whether the battery is capable of accepting and holding the charge.
The desulphation helps to keep the plates free from sulphate deposits, which extends the service life of the batteries. The maintenance charge (state-of-the-art) ensures that the performance of the batteries remains at 95 – 100%. Thanks to the included connection cables with crocodile clips and ring terminals (not SCS15 and SCS25), the Dometic NDS Smart Chargers are suitable for mobile use and fixed installation. Maintenance of batteries for seasonal vehicles during the winter months, built-in charger for e.g. manoeuvring aids (from Dometic NDS SCS8).
Main features:
Also suitable for LiFePO₄ batteries from SCS4
Opticharge algorithm
Selectable charging curves
Up to 9 charging stages
Protection class IP65
Incl. connection cables with ring terminals (not SCS15 and SCS 25) for fixed installation and crocodile clips for mobile use
OPTICHARGE, the algorithm from the NDS software team for always ready and healthy batteries: The charging is optimised based on the technical specifications selected by NDS specialists. Voltage and current supply are continuously monitored.
Variants from €50.00*
The battery charger LAS 1218-2 is a primary-phase switched power supply unit without temperature compensation and with two charging characteristics. It is suitable for lead-acid and lead-gel batteries, stabilises the charging current in the event of mains fluctuations and can also function as a power source without a battery. It enables recharging of the starter battery up to 3 A, is around 80% lighter than comparable thyristor chargers, does not cause ripple voltage and has an efficiency of approx. 90%.
Qi2 15 W wireless charging: enjoy the convenience of 15 W wireless charging, which is twice as fast as charging with Qi1 7.5 W – with Qi2 certification for fast, safe and efficient charging.
Ultra-fast charging with integrated 30 W/65 W cable: thanks to the integrated 30 W/65 W cable, no additional cable is required for fast charging. Experience the magnetic ease of maximum charging speed wherever you go.
Rapid charging: with a power output of 30 W/65 W and a charging time from 0% to 70% in less than 33 minutes, you can quickly be on your way.
Integrated stand for versatile use: the stand offers both an upright and a side viewing mode, enables hands-free use and also serves as a table stand.
Smart digital display (only 10,000 mAh): experience ultimate control with the dynamic display of this power bank. With smart app control, you can view the charging speed as well as the energy delivered and even personalise your display.
Smart app control (only 10,000 mAh): in addition to more detailed information about the charging process, you can activate the "Healthy Charging Mode" to extend your battery's service life. If you lose your power bank, you can locate it using the built-in buzzer.
Variants from €69.95*
Short-term peak power 3600 W; solar input 1000 W; outputs (11): 4 x AC, 2 x DC, 2 x USB-A, 2 x USB-C, car.
Universal AC-DC Charger
The chargers from the SMART CHARGER series are equipped with state-of-the-art microprocessor technology to meet the demands of daily use. It is e.g. suitable for motorcycles, cars, etc. Depending on the model, up to 9 charging stages can be completed. During battery diagnosis, it is checked whether the battery is capable of accepting and holding the charge.
The desulphation helps to keep the plates free from sulphate deposits, which extends the service life of the batteries. The maintenance charge (state-of-the-art) ensures that the performance of the batteries remains at 95 – 100%. Thanks to the included connection cables with crocodile clips and ring terminals (not SCS15 and SCS25), the Dometic NDS Smart Chargers are suitable for mobile use and fixed installation. Maintenance of batteries for seasonal vehicles during the winter months, built-in charger for e.g. manoeuvring aids (from Dometic NDS SCS8).
Main features:
Also suitable for LiFePO₄ batteries from SCS4
Opticharge algorithm
Selectable charging curves
Up to 9 charging stages
Protection class IP65
Incl. connection cables with ring terminals (not SCS15 and SCS 25) for fixed installation and crocodile clips for mobile use
OPTICHARGE, the algorithm from the NDS software team for always ready and healthy batteries: The charging is optimised based on the technical specifications selected by NDS specialists. Voltage and current supply are continuously monitored.
Variants from €50.00*
EXIDE chargers are suitable for all battery types (gel, AGM, wet). Benefit from the experience of one of the world's leading battery manufacturers.Fully automatic chargers for lead-acid batteries (car, motorbike, boat, motorhomes and agricultural machines)Adapts to the charging profile of the battery technology (GEL/AGM/Standard Wet) and battery capacity (Ah)Integrated temperature sensor that measures the ambient temperature and therefore prevents overchargingSpark protection against polarity reversal and faulty batteriesBuilt-in hand lamp, helpful when connecting clamps to the battery in the darkSpecially designed clamps for easy and quick connection to the batteryIncludes an additional cable for permanent installationSuitable for up to 150 AhSpecifically designed for gel, AGM and lead-acid batteries. With automatic 5-step charging profile. Mains adapter mode for charge maintenance and voltage maintenance in standby mode.
The Blue Smart IP65 charger is a professional battery charger with built-in Bluetooth. It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes.
The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life.
Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deeply discharged battery by forcing a weak charging current onto it. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals.
The charger is supplied with both crocodile clips and M8 cable lugs, making it very easy to connect to the battery. You can leave the device connected at all times if you wish.
The Blue Smart IP65 charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app.
Technical data
Input voltage: 230 V AC
Battery connection: 1.5 m black and red cable to DC plug
Incl. battery terminals and M8 ring cable lug
With CEE 7/7 connection (Schuko): 1.5 m
Variants from €68.00*
The SmartShunt is an all-in-one battery monitor that uses your phone as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet), allowing you to conveniently read all monitored battery parameters, such as state of charge, remaining time, historical information and much more.Alternatively, the SmartShunt can be connected and read by a GX device. The connection to the SmartShunt is made via a VE.Direct cable.The SmartShunt is a good alternative to a BMV battery monitor, especially for systems where battery monitoring is required but less wiring and chaos are desired. The SmartShunt is equipped with Bluetooth, a VE.Direct connection and a connection that can be used for monitoring a second battery, monitoring the midpoint or connecting a temperature sensor. Input voltage: 6.5 – 70 V DC.
IUoU battery chargers with gel, AGMGentle charging of 12 V batteries with optimised 6-stage IUoU charging technology and LI charging curveSimultaneous charging of two batteries plus starter batteryIncl. bus interface as standard for smooth integration into existing bus systemsTechnical data:Input voltage: 90 – 260 VFrequency: 50 – 60 HzFinal charging voltage: 14.4/14.7 VTrickle charging voltage: 13.8 VUo phase limitation: at 8 or 16 hoursEnergy efficiency: up to 92%Operating temperature: -20 to +50 °CUseful extensions: remote control, battery sensor from Hella, temperature sensor
Variants from €268.00*
The Blue Smart IP65 charger is a professional battery charger with built-in Bluetooth. It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes.
The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life.
Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deeply discharged battery by forcing a weak charging current onto it. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals.
The charger is supplied with both crocodile clips and M8 cable lugs, making it very easy to connect to the battery. You can leave the device connected at all times if you wish.
The Blue Smart IP65 charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app.
Technical data
Input voltage: 230 V AC
Battery connection: 1.5 m black and red cable to DC plug
Incl. battery terminals and M8 ring cable lug
With CEE 7/7 connection (Schuko): 1.5 m
Truma charger BC 10 incl. cable, sensor and circuit breaker. Without battery.
The Solara charge controller SR85TL is the perfect solution to efficiently and gently charge your batteries. With a regulated charging characteristic specifically tailored to the respective battery type, this single-circuit controller ensures maximum reliability and modern technology at minimal cost.
The battery pack AP18650 includes a standard 18650 Li-Ion 3.7 V/2.5 Ah battery for reliable performance. It can be conveniently and quickly charged via USB-C. The 18650 Li-Ion battery is the perfect companion for mobile applications, ensuring that your devices are always ready for use. With integrated charging and discharging intelligence.
Want to start your holiday relaxed? That is what the all-round carefree energy package is for.
Variants from €440.10*
IUoU battery chargers with gel, AGMGentle charging of 12 V batteries with optimised 6-stage IUoU charging technology and LI charging curveSimultaneous charging of two batteries plus starter batteryIncl. bus interface as standard for smooth integration into existing bus systemsTechnical data:Input voltage: 90 – 260 VFrequency: 50 – 60 HzFinal charging voltage: 14.4/14.7 VTrickle charging voltage: 13.8 VUo phase limitation: at 8 or 16 hoursEnergy efficiency: up to 92%Operating temperature: -20 to +50 °CUseful extensions: remote control, battery sensor from Hella, temperature sensor
Short-term peak power 3600 W; outputs (13): 4 x AC, 2 x DC, 2 x USB-A, 2 x USB-A Fast Charger, 2 x USB-C, car.
IUoU battery chargers with gel, AGMGentle charging of 12 V batteries with optimised 6-stage IUoU charging technology and LI charging curveSimultaneous charging of two batteries plus starter batteryIncl. bus interface as standard for smooth integration into existing bus systemsTechnical data:Input voltage: 90 – 260 VFrequency: 50 – 60 HzFinal charging voltage: 14.4/14.7 VTrickle charging voltage: 13.8 VUo phase limitation: at 8 or 16 hoursEnergy efficiency: up to 92%Operating temperature: -20 to +50 °CUseful extensions: remote control, battery sensor from Hella, temperature sensor
Variants from €268.00*
Universal AC-DC Charger
The chargers from the SMART CHARGER series are equipped with state-of-the-art microprocessor technology to meet the demands of daily use. It is e.g. suitable for motorcycles, cars, etc. Depending on the model, up to 9 charging stages can be completed. During battery diagnosis, it is checked whether the battery is capable of accepting and holding the charge.
The desulphation helps to keep the plates free from sulphate deposits, which extends the service life of the batteries. The maintenance charge (state-of-the-art) ensures that the performance of the batteries remains at 95 – 100%. Thanks to the included connection cables with crocodile clips and ring terminals (not SCS15 and SCS25), the Dometic NDS Smart Chargers are suitable for mobile use and fixed installation. Maintenance of batteries for seasonal vehicles during the winter months, built-in charger for e.g. manoeuvring aids (from Dometic NDS SCS8).
Main features:
Also suitable for LiFePO₄ batteries from SCS4
Opticharge algorithm
Selectable charging curves
Up to 9 charging stages
Protection class IP65
Incl. connection cables with ring terminals (not SCS15 and SCS 25) for fixed installation and crocodile clips for mobile use
OPTICHARGE, the algorithm from the NDS software team for always ready and healthy batteries: The charging is optimised based on the technical specifications selected by NDS specialists. Voltage and current supply are continuously monitored.
The battery charger LAS 1218 BUS, a compact and lightweight primary-phase switched power supply unit without fan, offers high charging currents for electronic block systems with SDT-BUS compatibility and temperature sensor. It supports lead-acid, lead-gel and AGM batteries and ensures a constant charging current even with mains voltage fluctuations. The device can also be used as a power supply without a battery, enables recharging of the starter battery up to 3 A, is up to 80% lighter than comparable thyristor chargers and is characterised by a high efficiency of around 90% without ripple voltage.
Can be used fully automatically to supply voltage to AGM and gel batteries
Fanless, TÜV, GS symbol
Charging according to IUoU characteristics (max. charging voltage 14.4 V and 14.7 V; max. 14.8 V controllable)
The Blue Smart IP65 charger is a professional battery charger with built-in Bluetooth. It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes.
The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life.
Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deeply discharged battery by forcing a weak charging current onto it. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals.
The charger is supplied with both crocodile clips and M8 cable lugs, making it very easy to connect to the battery. You can leave the device connected at all times if you wish.
The Blue Smart IP65 charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app.
Technical data
Input voltage: 230 V AC
Battery connection: 1.5 m black and red cable to DC plug
Incl. battery terminals and M8 ring cable lug
With CEE 7/7 connection (Schuko): 1.5 m
Variants from €68.00*
Multi-port: charges up to 3 devices simultaneously via 2 USB-C and 1 USB-A port.
65 W fast charging: perfect for MacBook Pro 14, Samsung S24 Ultra or Google Pixel Book.
Compact: 48% smaller thanks to GaN technology.
Universally compatible: for smartphones, tablets and USB-C laptops such as MacBook Air/Pro, ThinkPad, Surface.
Scope of delivery: charger, 100 W USB-C cable, manual, 18 months warranty.
Adjustable charging current 0.8 A or 3.8 AAdjustable charging voltage 14.4 V or 14.7 VCharge according to IUoU characteristicsPolarised and short-circuit protectedMemory function: last settings are savedDust-tight and splash-proof (IP65)Lightweight
Universal AC-DC Charger
The chargers from the SMART CHARGER series are equipped with state-of-the-art microprocessor technology to meet the demands of daily use. It is e.g. suitable for motorcycles, cars, etc. Depending on the model, up to 9 charging stages can be completed. During battery diagnosis, it is checked whether the battery is capable of accepting and holding the charge.
The desulphation helps to keep the plates free from sulphate deposits, which extends the service life of the batteries. The maintenance charge (state-of-the-art) ensures that the performance of the batteries remains at 95 – 100%. Thanks to the included connection cables with crocodile clips and ring terminals (not SCS15 and SCS25), the Dometic NDS Smart Chargers are suitable for mobile use and fixed installation. Maintenance of batteries for seasonal vehicles during the winter months, built-in charger for e.g. manoeuvring aids (from Dometic NDS SCS8).
Main features:
Also suitable for LiFePO₄ batteries from SCS4
Opticharge algorithm
Selectable charging curves
Up to 9 charging stages
Protection class IP65
Incl. connection cables with ring terminals (not SCS15 and SCS 25) for fixed installation and crocodile clips for mobile use
OPTICHARGE, the algorithm from the NDS software team for always ready and healthy batteries: The charging is optimised based on the technical specifications selected by NDS specialists. Voltage and current supply are continuously monitored.
Variants from €50.00*
The Blue Smart IP65 charger is a professional battery charger with built-in Bluetooth. It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes.
The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life.
Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deeply discharged battery by forcing a weak charging current onto it. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals.
The charger is supplied with both crocodile clips and M8 cable lugs, making it very easy to connect to the battery. You can leave the device connected at all times if you wish.
The Blue Smart IP65 charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app.
Technical data
Input voltage: 230 V AC
Battery connection: 1.5 m black and red cable to DC plug
Incl. battery terminals and M8 ring cable lug
With CEE 7/7 connection (Schuko): 1.5 m
Variants from €68.00*
The DELTA Pro 3 power stations for indoor and outdoor use are particularly powerful and therefore perfect for both at home and outings. Thanks to the wheels, the power station is easy to transport, allowing you to power your devices effortlessly. Thanks to the various outputs, it can be adapted to all your devices – be it a mobile phone, a laptop or a household appliance. With X-Stream technology, the models can be charged from 0 to 80% in just one hour. At home, the batteries of the DELTA Pro 3 series transform into practical backup power supplies. Thanks to the high storage capacity, you can power your devices at home for several hours in the event of a power outage – with renewable energy.
Short-term peak power 8000 W; outputs (11): 5 x AC, 2 x DC, 1 x CEE, 2 x USB-A Fast Charger, 2 x USB-C.
Scope of delivery: EcoFlow DELTA Pro 3 portable power station, quick guide, safety instructions, EcoFlow AC charging cable, handle protector.
IUoU battery chargers with gel, AGMGentle charging of 12 V batteries with optimised 6-stage IUoU charging technology and LI charging curveSimultaneous charging of two batteries plus starter batteryIncl. bus interface as standard for smooth integration into existing bus systemsTechnical data:Input voltage: 90 – 260 VFrequency: 50 – 60 HzFinal charging voltage: 14.4/14.7 VTrickle charging voltage: 13.8 VUo phase limitation: at 8 or 16 hoursEnergy efficiency: up to 92%Operating temperature: -20 to +50 °CUseful extensions: remote control, battery sensor from Hella, temperature sensor
Variants from €268.00*
Consists of:
Optima® YT S 4.2
Battery Charger BC 10 (10 A)
Disconnector
Easy click® pole clamps (fix installation)
Additional charging cable for flexible charging
Temperature sensor and bracket
Weight: 19.5 kg (battery)
Mover SX: 35 kg
System weight: 54.5 kg
Mover smart A: 32 kg
System weight 51.5 kg
Mover smart M: 33 kg
System weight 52.5 kg
Mover XT: 60 kg
System weight 79.5 kg
Consists of:
Optima® YT S 5.5
Battery Charger BC 10 (10 A)
Disconnector
Easy click® pole clamps (fixed installation)
Additional charging cable for flexible charging
Temperature sensor
Weight: 26.5 kg (battery)Mover smart A4: 64 kg
System weight 90.5 kg
Starter batteries and supply batteries are designed for different tasks. To start the engine, starter batteries must initially supply a high current and then serve as an energy buffer with smaller partial cycles. Supply or RV batteries, in contrast, are discharged at lower currents over longer periods of time and then charged again. This means they are subjected to considerably higher loads. These characteristics must be taken into account and require special charging technology to avoid damage and to guarantee a long service life. The IUoU battery chargers use a unique six-stage charging cycle. They provide optimum charging for all gel, AGM and wet batteries because they charge quickly and gently at the same time.The necessary charging voltage for lithium batteries with BMS (battery management system) can be set via DIP switches. This way, lithium batteries can be optimally charged with MCA chargers.Gentle charging of 12 V batteries with optimised 6-stage IUoU charging technologyVery compact and lightweight design, easy installationSleep mode for quiet charging at half the power – ideal at night or in parking spaces with low electrical circuit protectionComes as standard with a bus interface for smooth integration into existing bus systemsCompatible with the Dometic MPC 01 battery controller for perfect power managementUseful additions: remote control, Hella battery sensor, temperature sensor6-stage IUoU charging characteristicI phase: At the beginning of the charging process, the empty battery is charged with constant current (100% charging current) until the battery voltage reaches the charging voltage.Uo phase: The 3-stage absorption charging phase (Uo phase) begins. The duration depends on the battery. The voltage remains constant (Uo). In the first two minutes, the charge of the battery is determined. Then, the main charging phase begins, during which the battery is fully charged. When the battery is fully charged or the charging current is below 6% of the nominal charging current for 15 minutes, the Uo phase is completed.U phase: The charger switches to trickle charging. Conditioning: Every 12 days, the charger switches back to phase 1 to revive the battery and prevent sulphation.
Short-term peak power 3600 W; solar input 500 W; outputs (11): 4 x AC, 2 x DC, 2 x USB-A, 2 x USB-C, car.
Microprocessor-controlled universal HF charging device in a compact housing. Suitable for LiFePO₄/LiFeYPO₄ Li-Ion as well as for AGM, gel and wet batteries. Safe, fast and yet gentle charging with automatic soft start function. Enjoy a battery that is always charged as long as it is connected to the charger. The restart function automatically starts the recharge process as soon as the battery voltage is dropping. Thanks to the automatic wake-up function, batteries with a battery management system in "sleep mode" are reactivated without any problems. The 6 LEDs allow an easy indication of charging and operating condition as well as error messages. Equipped with temperature control sensor input.
Suitable for: LiFePO₄, wet, gel, AGM, AGM² – 13.5 V
LiFePO₄ mode: 14.4 V, automatic restart at U < 13.3 V
Automatic wake up function: automatic waking up of deep-discharge batteries
Charging periods: pre-charge, soft start and constant current
Charging current monitor/safety timer: to end CV phase.
Auto-restart: after voltage drop
Passively cooled, silent
Power supply mode: 13.5 V
Scope of delivery: charger, manual, clamps, M8 cable lugs.
The SmartShunt is an all-in-one battery monitor that uses your phone as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet), allowing you to conveniently read all monitored battery parameters, such as state of charge, remaining time, historical information and much more.Alternatively, the SmartShunt can be connected and read by a GX device. The connection to the SmartShunt is made via a VE.Direct cable.The SmartShunt is a good alternative to a BMV battery monitor, especially for systems where battery monitoring is required but less wiring and chaos are desired. The SmartShunt is equipped with Bluetooth, a VE.Direct connection and a connection that can be used for monitoring a second battery, monitoring the midpoint or connecting a temperature sensor. Input voltage: 6.5 – 70 V DC.
Variants from €90.00*
Blue Smart IP22 Charger is a professional battery charger with built-in Bluetooth! Blue Smart IP22 Charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes.
The wireless solution for monitoring voltage and current, changing settings and updating the charger when new functions are available. With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industry standard. The Blue Smart Charger has a microprocessor-controlled "adaptive" battery management system. The adaptive function automatically optimises the charging process depending on the way the battery is used.
Combination chargerDevice combination consisting of a mains charger, a charging converter (booster) and an MPP solar controller for complete energy supply in your motorhome. The batteries are automatically charged at all times, be it during travel or at a parking spot. Especially the generously dimensioned charging capacity of the integrated charging converter, with 30, 45 or 60 A, ensures that even during short trips, the RV battery is charged with full current and is fully charged upon arrival at your destination.
Starter batteries and supply batteries are designed for different tasks. To start the engine, starter batteries must initially supply a high current and then serve as an energy buffer with smaller partial cycles. Supply or RV batteries, in contrast, are discharged at lower currents over longer periods of time and then charged again. This means they are subjected to considerably higher loads. These characteristics must be taken into account and require special charging technology to avoid damage and to guarantee a long service life. The IUoU battery chargers use a unique six-stage charging cycle. They provide optimum charging for all gel, AGM and wet batteries because they charge quickly and gently at the same time.The necessary charging voltage for lithium batteries with BMS (battery management system) can be set via DIP switches. This way, lithium batteries can be optimally charged with MCA chargers.Gentle charging of 12 V batteries with optimised 6-stage IUoU charging technologyVery compact and lightweight design, easy installationSleep mode for quiet charging at half the power – ideal at night or in parking spaces with low electrical circuit protectionComes as standard with a bus interface for smooth integration into existing bus systemsCompatible with the Dometic MPC 01 battery controller for perfect power managementUseful additions: remote control, Hella battery sensor, temperature sensor6-stage IUoU charging characteristicI phase: At the beginning of the charging process, the empty battery is charged with constant current (100% charging current) until the battery voltage reaches the charging voltage.Uo phase: The 3-stage absorption charging phase (Uo phase) begins. The duration depends on the battery. The voltage remains constant (Uo). In the first two minutes, the charge of the battery is determined. Then, the main charging phase begins, during which the battery is fully charged. When the battery is fully charged or the charging current is below 6% of the nominal charging current for 15 minutes, the Uo phase is completed.U phase: The charger switches to trickle charging. Conditioning: Every 12 days, the charger switches back to phase 1 to revive the battery and prevent sulphation.
Variants from €255.00*
Pole terminals for simple, quick and easy connection and disconnection of battery connections. Manually without tools. Capacity up to 125 A. The poles are colour-coded.
Content: 2 Stck (€16.95* / 1 Stck)
With the CTEK CS ONE, charging batteries (3 to 180 Ah) is now even easier. The APTO™ adaptive charging technology takes care of everything – you do not even have to think about which terminal to connect to what! With dedicated app controls to unlock additional features, it is the most sophisticated charger on the market today. Super simple. Super smart. Robust design for ease of use and unique rear installation system for quick connection of CS accessories. Can remain securely connected for extended periods of time during trickle charging. Five-year manufacturer's warranty.Functions:RECOND for restoring and reconditioning lead-acid batteriesWAKE UP for reviving presumably dead lead-acid and lithium ion batteries12 V SUPPLY for supporting the battery during maintenance and for continuous power supply when removing/replacing the batteryADVANCED SETTINGS for monitoring the charger's voltage and currentScope of delivery: charger; 2 m cable, detachable clamps, operating instructions, CTEK APP for Android and iOS
Want to start your holiday relaxed? That is what the all-round carefree energy package is for.
The LiFePO₄ battery with an 11 A charger provides a safe, lightweight and durable power supply for camping and motorhomes. It achieves over 6000 charge cycles, is up to 80% lighter than comparable lead-acid or AGM batteries and can be operated in parallel or in series. For caravans with mover systems, the 50 Ah battery delivers a high usable capacity and reliably powers additional 12 V consumers.
Fully automatic battery charger with two charging outputs for emergency and special vehicles, high-quality motorhomes and boats. VOTRONIC chargers in the "Pb SMT" series are characterised by their compact design, low weight (high-frequency switching power supply, switch-mode technology) and full charging power even with large deviations in the mains supply (under/overvoltage, sine wave, frequency). The intelligent microprocessor charging control with "IU1oU2oU3" charging programmes (constant current – constant voltage) and dynamic charging time calculation automatically ensures fast and gentle full charging and subsequent 100% charge retention of the connected batteries from any initial charge level and always enables the simultaneous supply of parallel-connected 12 V consumers or the charging of very large batteries (depending on the application). Drained energy is equalised immediately.
Charging programme no. adjustable to different battery types: gel, AGM, acid, LiFePO₄
Automatic battery regeneration/Li Auto Wake Up
Mains adapter function (battery change)
Remote control connection/display
Silent run function
Lead temperature compensation/LiFePO4 protectionScope of delivery: charger, mains cable with IEC plug, operating instructions
Consists of:
Optima® YT S 2.7
Battery Charger BC 10 (10 A)
Disconnector
Easy click® pole clamps (fixed installation)
Additional charging cable for flexible charging
Temperature sensor
Weight: 11.6 kg (battery)
Mover XT/XT2: 28 kg
System weight: 39.6 kg
Qi2 15 W wireless charging: enjoy the convenience of 15 W wireless charging, which is twice as fast as charging with Qi1 7.5 W – with Qi2 certification for fast, safe and efficient charging.
Ultra-fast charging with integrated 30 W/65 W cable: thanks to the integrated 30 W/65 W cable, no additional cable is required for fast charging. Experience the magnetic ease of maximum charging speed wherever you go.
Rapid charging: with a power output of 30 W/65 W and a charging time from 0% to 70% in less than 33 minutes, you can quickly be on your way.
Integrated stand for versatile use: the stand offers both an upright and a side viewing mode, enables hands-free use and also serves as a table stand.
Smart digital display (only 10,000 mAh): experience ultimate control with the dynamic display of this power bank. With smart app control, you can view the charging speed as well as the energy delivered and even personalise your display.
Smart app control (only 10,000 mAh): in addition to more detailed information about the charging process, you can activate the "Healthy Charging Mode" to extend your battery's service life. If you lose your power bank, you can locate it using the built-in buzzer.
Blue Smart IP22 Charger is a professional battery charger with built-in Bluetooth! It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes.
The wireless solution for monitoring voltage and current, changing settings and updating the charger when new functions are available. With an efficiency of up to 93%, these chargers generate up to four times less heat compared to the industry standard. The Blue Smart Charger has a microprocessor-controlled "adaptive" battery management system. The adaptive function automatically optimises the charging process depending on the way the battery is used.
Variants from €205.95*