Verschraubungen & Ventile

Angle Valve M 20/TB 10 mm

Spare part water parts for Truma electric boiler (05/04 – 12/14).

€14.95*

Drain Valve Complete for Truma Water Heater

The drain valve is an original Truma spare part. Please check the manufacturer’s part number.

€11.50*

Winkelanschlussventil aus weißem Kunststoff, rote Dichtlippe mit schwarzem O-Ring oben, Auslaufarm seitlich sichtbar

Angle Valve JG 10/TB 10 mm

Angle valve incl. hose.

€21.95*

Elbow Fitting W, RVS 10 x RVS 10

Lightweight construction. Material: steel. Incl. cutting ring for steel pipes.

Variants from €7.95*

€9.95*

Anschluss Gas

RVS 8 x RVS 8 RVS 10 x RVS 10

Cutting Ring Screw Connection, RVS 8 x RVS 8

Lightweight construction. Material: steel. Incl. steel cutting ring for steel pipes.

€5.25*

Anschluss Gas

RVS 8 x RVS 8 RVS 10 x RVS 10

Injector Nozzle, 30 mbar

(2017/01 – …)

€3.00*

Betriebsdruck

30 mbar

Details

Plug-In Coupling Type SKU-QR, RVS 8 x SKU SV

For quick connection of hose lines to gas appliances without the use of tools.

Variants from €11.95*

€12.50*

Anschluss Gas

G 1/4 LH-KN x SKU

Elbow Fitting W, RVS 8 x RVS 8

Lightweight construction. Material: steel. Incl. cutting ring for steel pipes.

€7.95*

Anschluss Gas

RVS 8 x RVS 8 RVS 10 x RVS 10

Drain Valve TB 10 mm/2.8 bar

2.8 bar, for flexible hoses ø 10 mm, yellow

€40.95*

Plug Nipple for Plug-In Coupling SKU-QR, G 1/4 LH-ÜM x STN

Suitable for the plug-in coupling type SKU-QR.

€3.60*

Anschluss Gas

G 1/4 LH-ÜM x STN RST 8

Connector, straight

For use in pipes or fittings. Mounted with nut and cutting ring.

€6.25*

Variante

90° gerade

Plug Nipple for Plug-In Coupling SKU-QR, STN x G 1/4LH-ÜM 90°

Suitable for the plug-in coupling type SKU-QR.

Variants from €3.60*

€8.20*

Anschluss Gas

G 1/4 LH-ÜM x STN STN x G 1/4LH-ÜM 90°

Ball Valve

Ball valve with attachment. Maximum permissible pressure: PS 5 to 20 bar.

€37.50*

Verpackung

fertig verpackt

Connector

For the use in pipes or fittings.

€5.50*

Verpackung

fertig verpackt

Coupling Valve SKU SSV-K 3

Ball valve as shut-off valve with safety coupling according to DIN 4817-1, can only be fully opened or closed. DVGW-tested. Opening/closing the shut-off valve is only possible with a connected gas hose (SKU = plug connection; RVS = pipe coupling). Connection 8 mm.

€63.72* €69.95* (8.91% saved)

Verpackung

fertig verpackt

Metallisches Verbindungsstück mit außengewindetem linken Ende, Sechskantmutter und langem glatten Zylinder rechts

Connector

For the use in pipes or fittings.

€5.50*

Verpackung

fertig verpackt

Valve Cartdridge

The cartridge is an original CADAC spare part. Please check the manufacturer's part number.

€27.50*

Steckkupplung-Set aus Messing mit schwarzer Kunststoffhülle, zwei Anschlussstücke mit Gewinden G 1/4 LH-KN und STN x G1/4 LH-ÜM 90°

Plug-In Coupling Set Type SKU-QR, G 1/4 LH-KN x SKU and STN x G1/4LH-ÜM 90°

The plug-in coupling SKU-QR is equipped with an ergonomic, non-slip handle that makes it easy to connect and disconnect. When you disconnect the coupling, the gas passage is shut off. The sealing plug prevents the ingress of dirt and animals when the coupling is not in use. Additionally, the plug-in coupling is tamper-proof thanks to a special device – unlocking it is only possible using a standardised STN plug-in nipple.

Variants from €13.95*

€19.30*

Anschluss Gas

G 1/4 LH-KN x SKU und 2 x STN x G 1/4 LH-ÜM G 1/4 LH-KN x SKU und STN x G1/4LH-ÜM 90°

Valve Body

Spare part for Truma boilers B and BN 30 mbar series 3 (07/93 – 12/14).

€106.95*

Übergangsstutzen aus Messing mit Außengewinde, O-Ring-Dichtung und sechskantigem Kopf zum Anziehen

Transition Nozzle 4

For connecting a pressure regulator with German connection to the gas cylinders commonly used in Europe. AG KLF (G. 12) x IG W 21.8 x 1/14 LH: Belgium, UK, France, Ireland, Croatia, Latvia, Luxembourg, Macedonia, Montenegro, the Netherlands, Switzerland, Serbia, Slovakia, Slovenia, Spain and the Czech Republic.

€9.75*

Verpackung

fertig verpackt

Plug Nipple

Pipe connection 8 mm, brass.

€5.95*

Verpackung

fertig verpackt

City Water Regulator Colorado 1.4 bar, Module Smart Supply

Gardena, outlet pressure 1.4 bar, closing pressure 1.1 bar

€99.00*

Distribution Block Marine, RVS 8 x 4 x RVS 8

Quick closing valve according to DIN 4817-1, can only be fully opened or closed. Incl. blind plug and symbol stickers. DIN-DVGW-tested.

Variants from €58.50*

€99.95*

Anschluss Gas

RVS 8 x 2 x RVS 8 RVS 8 x 4 x RVS 8

Distribution Block KSV-AB2 Long, ø 10 mm

Distribution block with ergonomic tilting lever for easy operation. Colour coding in green for open and red for closed. Low pressure loss thanks to optimised function, including mounting bracket and clips with symbols to identify the appliances.

€39.95* €50.95* (21.59% saved)

Anschluss Gas

ø 8 mm ø 10 mm

Quick-Action Valve

Quick-action valve, can only be fully opened or closed. (RVS = Pipe connection)

€29.50*

Verpackung

fertig verpackt

Cross Fitting K, RVS 10

Lightweight construction. Material: Steel. Incl. cutting ring for steel pipes.

€24.69* €33.50* (26.3% saved)

Anschluss Gas

RVS 8 RVS 10

Verteilerblock Marine aus Messing mit drei grauen Drehknöpfen, jeder Knopf trägt Symbole, vier hexagonale Anschlussstutzen unten

Distribution Block Marine, RVS 8 x 3 x RVS 8

Quick closing valve according to DIN 4817-1, can only be fully opened or closed. Incl. blind plug and symbol stickers. DIN-DVGW-tested.

Variants from €58.50*

€67.50*

Anschluss Gas

RVS 8 x 2 x RVS 8 RVS 8 x 3 x RVS 8

Angle Valve JG 10/JG 12 mm

Angle valve incl. hose.

€21.95*

Flame Failure Safety Valve Set

Content: safety pilot valve, O-ring, nut, cutting ring

€222.95*

Double Branch Fitting

For connection to the regulator output and for the simultaneous connection of two consumption appliances to one regulator. G 1/4 left-hand union nut x 2 G 1/4 left-hand inside taper.

€11.95*

Verpackung

fertig verpackt

Union Nut Type M, ø 10 mm

For cutting ring fittings with a pipe diameter of 8 mm (IG M14 x 1.5) or 10 mm (IG M16 x 1.5).

Content: 5 Stck (€1.14* / 1 Stck)

Variants from €5.25*

€5.70*

Anschluss Gas

ø 8 mm ø 10 mm

Cutting Ring, 8 mm

Material: unhardened steel.

Content: 10 Stck (€0.80* / 1 Stck)

€7.95*

Verpackung

fertig verpackt

Distribution Block DSV-AB4, ø 10 mm

The distribution block is equipped with 4 outlets (pipe coupling 8 mm) and can be quickly opened and closed. Additionally, a filler plug and symbols for labelling the outlets are included in the scope of delivery. DIN-DVGW-tested shut-off valve.

Variants from €81.59*

€89.95*

Anschluss Gas

ø 8 mm ø 10 mm

Messing-Ventil mit blauem runden Knopfgriff, seitlichem Anschluss und langem flachen Stift, Nahaufnahme eines Ventilbauteils

Valve

The valve is an original CADAC spare part. Please pay attention to the manufacturer's part number.

€27.50*

Valve Body

The valve body is an original Truma spare part. Please check the manufacturer’s part number.

€124.00*

Plug-In Coupling Set Type SKU-QR, RVS 8 x SKU and STN x RST 8

Variants from €13.95*

€15.30*

Anschluss Gas

G 1/4 LH-KN x SKU und 2 x STN x G 1/4 LH-ÜM RVS 8 x SKU und STN x RST 8

Cutting Ring Screw Connection G-MS

It is necessary to use reinforcing sleeves (310/928) when assembling cutting ring screw connections with copper tube.Liquid gas systems on boatsLiquid gas systems on boats are standardised in DIN EN ISO 10239. This takes into account the sometimes extreme conditions such as corrosion, low or high temperatures and strong movements of the boat.

€13.25*

Verpackung

fertig verpackt

Schneidringverschraubung T-MS aus Messing in T-Form mit drei Anschlussgewinden und seitlichen Verbindungen, GOK-Prägung am Gehäuse sichtbar

Cutting Ring Screw Connection T-MS

Reinforcing sleeves (310/928) must be used when assembling cutting ring screw connections with copper tube. Liquid gas systems on boats Liquid gas systems on boats are standardised in DIN EN ISO 10239. This takes into account the sometimes extreme conditions such as corrosion, low or high temperatures and strong movements of the boat.

€19.50*

Verpackung

fertig verpackt

T-Fitting T, RVS 10

Lightweight construction. Material: steel. Incl. steel cutting ring for steel pipes.

Variants from €7.95*

€10.50*

Anschluss Gas

RVS 8 RVS 10

Distribution Block KSV-AB3 Short, ø 10 mm

Minimal pressure loss due to optimised functionColour coding of the open position (green) or closed position (red)Ergonomic tilting lever (actuating element) Incl. mounting bracket and clips with symbols for labelling the appliances Incl. filler plug in the outletMaterial seals: NBRMaterial tilting lever: PA6 GF30 With union nut type M and cutting ring type D

€43.95* €55.95* (21.45% saved)

Anschluss Gas

ø 8 mm ø 10 mm

Distribution Block KSV-AB4 Short, ø 10 mm

Minimal loss of pressure thanks to optimised functionActuating element: ergonomic tilting lever made of PA6 GF30 Colour coding of the open (green) or closed position (red) Incl. filler plug in the outlet and clips with symbols for labelling the appliancesIncl. mounting bracketWith union nut type M and cutting ring type D Material (seals): NBR

€70.95* €89.95* (21.12% saved)

Anschluss Gas

ø 8 mm ø 10 mm