The pipe ÜR 3 offers a reliable solution for air conveyance, ø 65 mm.
Variants from €30.00*
Truma Combi heaters combine heating and hot water functions in one device with an integrated stainless steel tank. They are lighter than their predecessors, consume less battery power and diesel, are easier to maintain and have an automatic altitude adjustment up to 3000 m as well as a standardised wall flue for both variants.Technical features include a heat output of up to 6000 W, 10 litre water capacity and efficient power consumption. The scope of delivery includes the heater, a room temperature sensor, Truma iNet X panel, control panel cable, fuel line, dosing pump and mounting parts. Water sets and tank connection sets as well as flue gas ducts must be ordered separately.Please note: Truma diesel heaters (Combi D and Combi D next generation) are approved for operation with HVO, XtL according to EN 15940 in pure form (e.g. HVO100, i.e. 100% hydrogenated vegetable oil) as well as their mixtures with pure fossil diesel fuel and B7.
Variants from €2,799.00*
Uses the Truma warm air distribution to lead the warm air into the awning.
Can be connected to any Truma heating system with warm air distribution
Increases the use value of your awning especially in the evening and morning hours, but particularly during the transitional period thanks to simple temperature control
Comfortable and simple operation
Extracts moisture from the awning or at least reduces it (e.g. overnight, 300 – 500 W at continuous operation is sufficient)
During winter camping, items in the awning (e.g. ski shoes) can be preheated pleasantlyScope of delivery: warm air diffuser with hatch, fan T-piece, string lock with slider, 1 m warm air distribution pipe
End piece with air flap, suitable for fan-T LT, end piece nut EM and pipes ø 65 mm.
Especially for caravans.The 5 l water heater provides hot water in the smallest dimensions. It uses the warm air distribution to heat water. The heater can be used without using the heating, as it is equipped with an electric heating element (230 V/300 W).Scope of delivery: control panel, drain and vent valve (without mixing valve)Technical data: heating-up time from 15 °C to 60 °C approx. 50 min; power supply: 230 V ~ 50 Hz; power consumption: 1.3 A (300 W); thermal cutout: 65 °C; pressure: max. 1.2 bar
Truma Combi heaters combine heating and hot water functions in one device with an integrated stainless steel tank. They are lighter than their predecessors, consume less battery power and diesel, are easier to maintain and have an automatic altitude adjustment up to 3000 m as well as a standardised wall flue for both variants.Technical features include a heat output of up to 6000 W, 10 litre water capacity and efficient power consumption. The scope of delivery includes the heater, a room temperature sensor, Truma iNet X panel, control panel cable, fuel line, dosing pump and mounting parts. Water sets and tank connection sets as well as flue gas ducts must be ordered separately.Please note: Truma diesel heaters (Combi D and Combi D next generation) are approved for operation with HVO, XtL according to EN 15940 in pure form (e.g. HVO100, i.e. 100% hydrogenated vegetable oil) as well as their mixtures with pure fossil diesel fuel and B7.
The mobile parking heater Autoterm 2D by Pundmann in 3 variations. Be it in a roof tent, in small quarters, in a tent or generally when camping, it is the ideal companion for outdoor enthusiasts. Due to its small dimensions and the small capacity of 40 litres, the heater can easily be stowed in the boot and is therefore always with you. Two handles make it easy to carry the heater from one place to another. Incl. remote control and Anderson plug for charging other devices. Ideal for rooms up to 20 m².Technical data: Heat output: 0.8 to 2 kW; consumption: 0.10 l/h to 0.24 l/h.
The mobile parking heater Autoterm 2D by Pundmann in 3 variations. Be it in a roof tent, in small quarters, in a tent or generally when camping, it is the ideal companion for outdoor enthusiasts. Due to its small dimensions and the small capacity of 40 litres, the heater can easily be stowed in the boot and is therefore always with you. Two handles make it easy to carry the heater from one place to another. Incl. remote control and Anderson plug for charging other devices. Ideal for rooms up to 20 m².Technical data: Heat output: 0.8 to 2 kW; consumption: 0.10 l/h to 0.24 l/h.
Variants from €1,049.00*
The AZR branch pipe enables the efficient distribution of air or gas in various systems. Easy to integrate and durable – the perfect choice for reliable piping installations.
Variants from €13.90*
These devices are specifically designed for use in recreational vehicles. They can be used where space is limited and only low current ratios with weak fusing are available.KB 3 (3 l, wall installation) and KB 6 (6 l, ground installation) are low-pressure boilers and can be connected with a hose to submersible pumps without a check valve or to any other water system with a suitable fitting. Heatable from approx. 35 °C to approx. 85 °C, mixable to approx. 3 times the quantity at full heating, less power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat- and corrosion-resistant. Quick and easy assembly with mounting bracket.Fast heatingLow-pressure boilerLow power consumptionFrost monitor for winter operationWater connection 10 mmTÜV-approved5 years warrantyScope of delivery: adjustable thermostat, frost monitor and overheating protection, 1 m cable.Mixing valve TT (not included) for adjusting the water temperature.
Variants from €241.25*
The Pundmann pressure boiler is available in 3-, 6- or 9-litre versions and heats water with a 180 W or 200 W heating element via a 12 V power supply. At a working pressure of 2.3 bar, the water stays warm for longer. The boiler automatically starts heating and switches off once the desired temperature is reached. Its compact design and ease of use make it a practical and functional device.Technical data: heating time: approx. 75 min./75 °C; water connection diameter 10 mm. Operating pressure: 2.3 bar; safety valve setting: 3.0 bar.
Variants from €289.00*
Truma Combi heaters combine heating and hot water functions in one appliance with an integrated stainless steel tank. They are characterised by a weight saving of 3 kg compared to older models, low consumption, a longer service life thanks to efficient combustion control, automatic altitude adjustment up to 3000 m and a uniform wall flue for all variants.Technical highlights include up to 6 combustion stages, a heat output of up to 6000 W, 10 litre water capacity and a water heating time of approx. 24 minutes. The scope of delivery includes the Combi D heater, a room temperature sensor, the Truma iNet X panel, a control panel cable, a fuel line, a dosing pump and mounting parts. Water sets and the tank connection set for Combi D as well as a wall flue set with flue gas pipe and feed pipe are available separately.Please note: Truma diesel heaters (Combi D and Combi D next generation) are approved for operation with HVO, XtL according to EN 15940 in pure form (e.g. HVO100, i.e. 100% hydrogenated vegetable oil) as well as their mixtures with pure fossil diesel fuel and B7.
The Truma VarioHeat eco is the perfect heater for motorhomes, caravans and vans. This compact heater offers efficient performance and can be installed flexibly without losing valuable storage space. The installation is straightforward and space-saving. With the optional Truma E-Kit (item no.: 309/599, not included), the VarioHeat eco becomes a versatile electric heater. It is controlled via the digital control panel Truma CP plus VarioHeat.Technical data:
Nominal heat output:Level 1/2: 1300/2800 W
Air conveyance:Level 1/2: 75/155 m³/h
Gas consumption (propane/butane):Level 1/2: 100/220 g/h
Current consumption (12 V):Level 1/2: 0.65/2.75 A
The delivery includes a 6 m long cable, a room temperature sensor, a mounting bracket and accessories for the electrical connection.
The Pundmann pressure boiler is available in 3-, 6- or 9-litre versions and heats water with a 180 W or 200 W heating element via a 12 V power supply. At a working pressure of 2.3 bar, the water stays warm for longer. The boiler automatically starts heating and switches off once the desired temperature is reached. Its compact design and ease of use make it a practical and functional device.Technical data: heating time: approx. 75 min./75 °C; water connection diameter 10 mm. Operating pressure: 2.3 bar; safety valve setting: 3.0 bar.
The Pundmann pressure boiler is available in 3-, 6- or 9-litre versions and heats water with a 180 W or 200 W heating element via a 12 V power supply. At a working pressure of 2.3 bar, the water stays warm for longer. The boiler automatically starts heating and switches off once the desired temperature is reached. Its compact design and ease of use make it a practical and functional device.Technical data: heating time: approx. 75 min./75 °C; water connection diameter 10 mm. Operating pressure: 2.3 bar; safety valve setting: 3.0 bar.
Variants from €289.00*
The Autoterm 2D 12 V hot water set with a 6-litre boiler featuring a heating element and Autoterm diesel parking heater, which heats the water in the boiler, is a popular solution for motorhomes and other recreational vehicles. When the vehicle is in motion, the engine heats the water in the boiler, thus saving fuel. When the vehicle is stationary, e.g. at a campsite, the Autoterm 2D diesel parking heater can heat up the water in the heating boiler and keep the vehicle warm.The set consists of:Therm Boiler 6 Air with heating elementDiesel parking heater Autoterm AIR 2DConvenient control panelHot air duct 3 m 60 mmT-piece Y with flapT-piece with flap2 x air outlet 60 mm2 x air outlet grilleMixing valve3 x vase connector2 x hot air reduction 90-60
For the air distribution pipes of electric heaters, ø 65 mm and ø 72 mm.
The ÜR 3 pipe offers a reliable solution for guiding air, ø 75 mm.
Variants from €31.50*
These devices are specifically designed for use in recreational vehicles. They can be used where space is limited and only low current ratios with weak fusing are available.KB 3 (3 l, wall installation) and KB 6 (6 l, ground installation) are low-pressure boilers and can be connected with a hose to submersible pumps without a check valve or to any other water system with a suitable fitting. Heatable from approx. 35 °C to approx. 85 °C, mixable to approx. 3 times the quantity at full heating, less power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat- and corrosion-resistant. Quick and easy assembly with mounting bracket.Fast heatingLow-pressure boilerLow power consumptionFrost monitor for winter operationWater connection 10 mmTÜV-approved5 years warrantyScope of delivery: adjustable thermostat, frost monitor and overheating protection, 1 m cable.Mixing valve TT (not included) for adjusting the water temperature.
The pipe VR 72 with a diameter of 72 mm is ideal for effective air distribution and is versatile for use in heating and ventilation systems.
Variants from €37.90*
Liquid gas heater with water heater, optionally with electric heater 230 V, 1800 W.Compact: light and space-saving heatingConvenient: easy to installCan be combined: automatic air conditioning possible in conjunction with Truma air conditioning systemFlexible: also available as a hybrid heater in the Combi E versionTechnical data:Heat output: 2000 W – 6000 WWater capacity: 10 lHeating of water from approx. 15 °C to approx. 60 °C: approx. 23 min.Power consumption 12 V: heating and hot water: 1.2 – 6.5 A; hot water: 0.5 APower consumption 230 V: 3.9 – 7.8 AScope of delivery: Combi heater with room temperature sensor, Truma iNet X panel, control panel cable 6 m and mounting parts (without exhaust system and without water connection set).Please order separately: water set (consists of FrostControl and elbow connectors) – optionally water set FC TB (fir tree connection) or the water set FC JG (John Guest) and exhaust system – e.g. wall flue set complete with 1.1 m exhaust pipe, 1 m feed pipe and clamps.
The Webasto Thermo Top Evo Motorcaravan water heater is a powerful auxiliary heater for vehicles. It ensures rapid heating of the driver's cab, reduces fuel consumption and enables operation with diesel directly from the vehicle tank. With a heat output of 1.8 – 5.0 kW and low energy consumption, it offers quiet operation and a fast heat-up time. It is ideal for the cold season and protects the engine by preheating it before travelling. Various installation kits and an optional radio remote control are available.
Warm air via air outlets inside the dashboard
Quick warming up of the driver's cabin
High heating power of 5 kW
Low diesel fuel and energy consumption
Runs on diesel right out of your vehicle tank
Low-noise operation
Quick heating-up time
Heating power: 1.8 – 5.0 kW
Fuel: diesel
Fuel consumption: 0.22 – 0.62 l/h
Nominal power consumption: 10 – 33 W
The Truma VarioHeat comfort is the perfect heater for motorhomes, caravans and vans. This compact heater offers efficient performance and can be installed flexibly without losing valuable storage space. The installation is straightforward and space-saving. With the optional Truma E-Kit (item no.: 309/599, not included), the VarioHeat comfort becomes a versatile electric heater. It is controlled via the digital control panel Truma CP plus VarioHeat.Technical data:
Nominal heat output:Level 1/2/3: 1300/2800/3700 W
Air conveyance:Level 1/2/3: 75/155/210 m³/h
Gas consumption (propane/butane):Level 1/2/3: 100/220/290 g/h
Current consumption (12 V):Level 1/2/3: 0.65/2.75/5.4 A
The delivery includes a 6 m long cable, a room temperature sensor, a mounting bracket and accessories for the electrical connection.
The Truma electric boiler heats the water in your caravan or motorhome quickly and keeps it warm for a long time. This way, you can always thoroughly wash your hands, do the dishes or even have a long, hot shower. The high-quality stainless steel container with extra high capacity makes this possible. At the same time, the electric boiler consumes little electricity and operates almost silently.Powerful heating element provides hot water in a short timeMinimal loss of heat thanks to high-quality insulationLow energy consumptionTechnical data: 14 l capacity, 230 V – 850 W, power consumption 3.7 A, heating time from 15 °C to 70 °C: approx. 70 min., pumping pressure: max. 2.8 bar, weight: 3 kg, dimensions (L x W x H) 405 x 405 x 295 mm. Thermal cutout: 70 °C.Scope of delivery: boiler, control panel, 3 m cable.
The boiler gas BGF ensures a reliable hot water supply in recreational vehicles for showering, washing dishes and washing your hands. It differs from the boiler gas mainly due to the wall flue. The boiler gas BGF does not need to be installed directly on the vehicle wall. It features a special flue attachment to which a flue gas pipe system is connected. The permissible pipe length of up to 150 cm allows for flexible installation of the wall flue and boiler.Technical data: power consumption at 12 V max. 0.51 A, water capacity 10 l, heating output 1500 WScope of delivery: boiler gas BGF, control panel with 3 m control cable, cutting ring, brass support sleeve for copper pipe, condensate hose, condensate drainage set and installation materials.
The heating foil, originally developed for space technology, offers reliable protection at outside temperatures as low as -40 °C.Low power consumption thanks to temperature-controlled switching levelsInsulating special foam for excellent thermal conductivityInsensitive to stone impact, as the heating wire covers only approx. 15% of the surface areaOverheating-proof, thermostatically controlled with special adhesive coatingEasy to install by gluing onto all freshwater/wastewater tanks, even with uneven surfaces and protrusionsIf the temperature at the tank drops below 7 °C, the ULTRAHEAT tank heater heats the water. From a temperature of 19 °C, the heating process is automatically terminated.
The heating foil, originally developed for space technology, offers reliable protection at outside temperatures as low as -40 °C.Low power consumption thanks to temperature-controlled switching levelsInsulating special foam for excellent thermal conductivityInsensitive to stone impact, as the heating wire covers only approx. 15% of the surface areaOverheating-proof, thermostatically controlled with special adhesive coatingEasy to install by gluing onto all freshwater/wastewater tanks, even with uneven surfaces and protrusionsIf the temperature at the tank drops below 7 °C, the ULTRAHEAT tank heater heats the water. From a temperature of 19 °C, the heating process is automatically terminated.
Variants from €102.00*
These devices are specifically designed for use in recreational vehicles. They can be used where space is limited and only low current ratios with weak fusing are available.KB 3 (3 l, wall installation) and KB 6 (6 l, ground installation) are low-pressure boilers and can be connected with a hose to submersible pumps without a check valve or to any other water system with a suitable fitting. Heatable from approx. 35 °C to approx. 85 °C, mixable to approx. 3 times the quantity at full heating, less power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat- and corrosion-resistant. Quick and easy assembly with mounting bracket.Fast heatingLow-pressure boilerLow power consumptionFrost monitor for winter operationWater connection 10 mmTÜV-approved5 years warrantyScope of delivery: adjustable thermostat, frost monitor and overheating protection, 1 m cable.Mixing valve TT (not included) for adjusting the water temperature.
Variants from €241.25*
Liquid gas heater with water heater, optionally with electric heater 230 V, 1800 W.Compact: light and space-saving heatingConvenient: easy to installCan be combined: automatic air conditioning possible in conjunction with Truma air conditioning systemFlexible: also available as a hybrid heater in the Combi E versionTechnical data:Heat output: 2000 W – 6000 WWater capacity: 10 lHeating of water from approx. 15 °C to approx. 60 °C: approx. 23 min.Power consumption 12 V: heating and hot water: 1.2 – 6.5 A; hot water: 0.5 APower consumption 230 V: 3.9 – 7.8 AScope of delivery: Combi heater with room temperature sensor, Truma iNet X panel, control panel cable 6 m and mounting parts (without exhaust system and without water connection set).Please order separately: water set (consists of FrostControl and elbow connectors) – optionally water set FC TB (fir tree connection) or the water set FC JG (John Guest) and exhaust system – e.g. wall flue set complete with 1.1 m exhaust pipe, 1 m feed pipe and clamps.
Variants from €2,199.95*
The heating foil, originally developed for space technology, offers reliable protection at outside temperatures as low as -40 °C.Low power consumption thanks to temperature-controlled switching levelsInsulating special foam for excellent thermal conductivityInsensitive to stone impact, as the heating wire covers only approx. 15% of the surface areaOverheating-proof, thermostatically controlled with special adhesive coatingEasy to install by gluing onto all freshwater/wastewater tanks, even with uneven surfaces and protrusionsIf the temperature at the tank drops below 7 °C, the ULTRAHEAT tank heater heats the water. From a temperature of 19 °C, the heating process is automatically terminated.
Variants from €102.00*
End piece with air flap, suitable for fan-T LT, end piece nut EM and pipes ø 65 mm.
The safety valve is urgently needed when using a Nautic Compact Air in vehicles with a pressurised water system.
For securing gas and water tanks, including underfloor tanks. Load capacity per tensioning strap: 150 kg.The self-assembly kit consists of:1 steel tensioning strap; dimensions (L x W): 450 x 2.7 cm2 height adjustment pieces, zinc-plated for M82 eye bolts M8 x 25 mm, zinc-plated2 threaded screws M8/45 mm, zinc-plated4 threaded screws M8/25 mm, zinc-plated6 nuts M8, zinc-plated12 washers M8
These devices are specifically designed for use in recreational vehicles. They can be used where space is limited and only low current ratios with weak fusing are available.KB 3 (3 l, wall installation) and KB 6 (6 l, ground installation) are low-pressure boilers and can be connected with a hose to submersible pumps without a check valve or to any other water system with a suitable fitting. Heatable from approx. 35 °C to approx. 85 °C, mixable to approx. 3 times the quantity at full heating, less power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat- and corrosion-resistant. Quick and easy assembly with mounting bracket.Fast heatingLow-pressure boilerLow power consumptionFrost monitor for winter operationWater connection 10 mmTÜV-approved5 years warrantyScope of delivery: adjustable thermostat, frost monitor and overheating protection, 1 m cable.Mixing valve TT (not included) for adjusting the water temperature.
Variants from €241.25*
If a unit without water content is operated electrically, the radiator will overheat. At approx. 115 °C, the temperature fuse inserted in the radiator responds and thus prevents greater damage. It can be renewed and easily replaced.
The domestic water is heated during the heating phase by the warm air from your heating system via the built-in heat exchanger. The water can also be warmed up to 70 °C via the built-in 230 V electric cartridge. Nautic Compact Air is a convenient addition to your warm air heating. Suitable for 230 V and the connection to your pre-existing heating system in combination with the heat exchanger.Self-regulating heaterOverheating protectionWater drain valveHeating element: 230 V, 500 W (2.2 A)Water connection: 10 mmAir hose connection: 65 – 75 mmFor pressure water systems, a safety drain valve is required (optional)
Variants from €499.93*
The mobile parking heater Autoterm 2D by Pundmann in 3 variations. Be it in a roof tent, in small quarters, in a tent or generally when camping, it is the ideal companion for outdoor enthusiasts. Due to its small dimensions and the small capacity of 40 litres, the heater can easily be stowed in the boot and is therefore always with you. Two handles make it easy to carry the heater from one place to another. Incl. remote control and Anderson plug for charging other devices. Ideal for rooms up to 20 m².Technical data: Heat output: 0.8 to 2 kW; consumption: 0.10 l/h to 0.24 l/h.
Variants from €1,049.00*
The stainless steel hot water boilers are available in 12 V and 230 V versions and can heat the water to a temperature of 75 degrees Celsius. This product is a low-pressure boiler and should only be used in unpressurised operation.