Pleasant heat for caravans, boats, conservatories and homes.The Ecomat can be operated at three different power levels (450/750/1800 W with fuses of 2/4/10 A) and can therefore also be connected to weakly fused lines. The temperature is infinitely variable via the electronic thermostat.Ceramic heating elementThe PTC heating element generates pleasant convection heat and does not dry out the air.Frost monitor functionReliably keeps the temperature above freezing and prevents frost damage.Automatic switch-offWhether at home, on a boat or when camping, the Ecomat 2000 switches off automatically when it tips over.Can be connected almost anywhereMany campsites and boat moorings only have 500 W. No problem with the Ecomat 2000!SafeThere are no glowing components in the Ecomat 2000, so that the risk of fire is greatly reduced.Very quietAlso suitable for continuous operation and, thanks to the metal housing, without unpleasant odours.
New
With the EcoFlow Alternator Charger Plus 1000, you can efficiently charge your power station via the vehicle alternator while driving. The additional 300 W solar input provides greater flexibility and energy independence when camping, enjoying vanlife or travelling. The integrated ignition cable supports safe control of the charging process in the vehicle.Scope of delivery: EcoFlow Battery Charger Plus 1000, alternator input cable with integrated ignition cable, XT150 output cable, 125A fuse cable, mounting material, user manual and warranty card.
The solar remote display SF with LCD screen offers many features: it measures charging current (A) and system voltage (V), displays the solar power in a bar graph and shows the time and date. The energy counting function (Ah, Wh) allows you to read the capacity transferred to the battery. All values can be reset. Additionally, there is a programmable switching output. Please note: not suitable for MPPT solar controllers!
Universal safety plug with screwed strain relief. Suitable for cigarette lighter and standard sockets. With screw contacts up to 2.5 mm², lockable compensating sleeve through bayonet locking and fold-out pulling tool.
This special cable ensures that all N-BUS-compatible convenience devices on board your vehicle are connected to each other in a common network. This allows you to monitor or control your devices through a single interface. The devices, in turn, can exchange their data with each other, ensuring better energy management.
Variants from €4.50*
The solar remote display SF with LCD screen offers many features: it measures charging current (A) and system voltage (V), displays the solar power in a bar graph and shows the time and date. The energy counting function (Ah, Wh) allows you to read the capacity transferred to the battery. All values can be reset. Additionally, there is a programmable switching output. Please note: not suitable for MPPT solar controllers!
This cable set is suitable, for example, for connecting an inverter to a battery. The set includes one red and one black cable with a cross-section of 50 mm² and is equipped with M8 connectors. Outer material (insulation): TM2. Cable type: ELFLEX.
The combi inverter with integrated charger was developed for the motorhome sector and combines all important functions in a compact, lightweight device. External components, additional wiring and separate fuses are eliminated, significantly simplifying installation and saving on materials and labour time. Advantages include the integrated mains priority switch, a 16-20 A fuse with RCD protection, an illuminated display with adjustment options, CAN bus connection, AC connection with Wago Winsta, tool-free restoration of the 230 V AC circuit, possible underseat installation, integrated short-circuit protection and durable components. The device offers high safety, space-saving installation and reliable power supply.
Variants from €1,499.00*
The USB-C™/USB-A 3.0 OTG SuperSpeed adapter allows you to quickly and straightforwardly connect USB-A devices and USB-C™ ports.
This ventilation system is ideal for RV HVAC systems, dryers, greenhouses and more, as it transports fresh air for heating and cooling purposes. It offers intelligent speed control with 6 manual levels, automatic temperature control and a timer. The fans switch off below 20 °C and automatically adjust their speed between 20 °C and 45 °C. Above 45 °C, they run at maximum speed. With an IP55 certification, it is waterproof and suitable for all environments. Incl. two steel pipe clamps for ø 60 mm pipes and rectifier.
New
Battery charger for charging compatible power stations via the alternator while driving. Suitable for the EcoFlow RIVER and DELTA series as well as partially for third-party power stations with XT60 connection. Compatible with petrol, diesel, hybrid, and partially plug-in hybrid vehicles.
Max. charging power 600 W. Input 11 – 31 V/45 A, output 40 – 60 V/12 A. With protection functions against reverse polarity, overcurrent, short circuit, as well as over- and undervoltage. Protection class IP4X, noise level < 40 dB, operating temperature -10 °C to +45 °C.
Scope of delivery: Alternator Charger 600, alternator input cable with integrated ignition cable, XT60 output cable, 125 A fuse cable, mounting material, user manual and warranty card.
Nominal cross section 6.0 mm² (4), Clamping range 2.5 – 4.0 mm², 12-pin. Open and captive contact screws, 450 V; for temperatures up to 85 °C.
This special cable ensures that all N-BUS-compatible convenience devices on board your vehicle are connected to each other in a common network. This allows you to monitor or control your devices through a single interface. The devices, in turn, can exchange their data with each other, ensuring better energy management.
Variants from €4.50*
Qi2 15 W wireless charging: enjoy the convenience of 15 W wireless charging, which is twice as fast as charging with Qi1 7.5 W – with Qi2 certification for fast, safe and efficient charging.
Ultra-fast charging with integrated 30 W/65 W cable: thanks to the integrated 30 W/65 W cable, no additional cable is required for fast charging. Experience the magnetic ease of maximum charging speed wherever you go.
Rapid charging: with a power output of 30 W/65 W and a charging time from 0% to 70% in less than 33 minutes, you can quickly be on your way.
Integrated stand for versatile use: the stand offers both an upright and a side viewing mode, enables hands-free use and also serves as a table stand.
Smart digital display (only 10,000 mAh): experience ultimate control with the dynamic display of this power bank. With smart app control, you can view the charging speed as well as the energy delivered and even personalise your display.
Smart app control (only 10,000 mAh): in addition to more detailed information about the charging process, you can activate the "Healthy Charging Mode" to extend your battery's service life. If you lose your power bank, you can locate it using the built-in buzzer.
Variants from €69.95*
Blade-type fuse set Micro 2 for many common vehicle types, 8 pieces. Contains one fuse each of 3/5/7.5/10/15/20/25/30 A.
This fully automatic battery charge converter for LiFePO₄ batteries in special-purpose vehicles, high-end motorhomes and marine applications has been developed in accordance with the latest standards for charging service batteries using lithium LiFePO₄ technology whilst on the move.
Maximum safety, compact design and well-thought-out technology: the BullTron inverter was developed for motorhomes and offers particularly simple installation as well as comprehensive safety features. Thanks to the integrated mains priority switching and RCCB, additional wiring is not needed, saving both material and labour time. The small size and light weight enable space-saving installation, for example under the seat with the battery. The 230 V AC line can be restored without tools. Advantages include a compact design, low weight, automatic switching between mains power and battery, integrated fuse, illuminated remote switch with 5 m cable, AC connection with Wago Winsta, tool-free restoration of the 230 V supply, integrated short-circuit protection and durable components for reliable operation.
Variants from €749.00*
This convenient 800 W heater is perfect for camping. The anti-tilt mechanism ensures that the heater switches off if it accidentally falls over. With two adjustable heating levels. On/off switch with indicator light.
Automatic fuse for caravan and boat. Manually resettable. Serves as protection of the on-board mains and the consumer. Commercial fuses can simply be replaced by this fuse.
The Booster WA 1208 increases the available charging voltage to max. 14.4 V while driving, resulting in the best possible charging of the caravan battery. The booster separates the caravan battery from the starter battery of the towing vehicle when the engine and ignition are switched off. Input voltage 9.0 – 14.5 VInput current max. 11 AOutput voltage 14.4 VPower output approx. 8 A at an input voltage of 12 VReturn current from caravan battery < 0.5 mA. When the ignition is off, no current flows.
Short-term peak power 3600 W; solar input 1000 W; outputs (11): 4 x AC, 2 x DC, 2 x USB-A, 2 x USB-C, car.
Pleasant heat for caravans, boats, conservatories and homes.The Ecomat can be operated at three different power levels (450/750/1800 W with fuses of 2/4/10 A) and can therefore also be connected to weakly fused lines. The temperature is infinitely variable via the electronic thermostat.Ceramic heating elementThe PTC heating element generates pleasant convection heat and does not dry out the air.Frost monitor functionReliably keeps the temperature above freezing and prevents frost damage.Automatic switch-offWhether at home, on a boat or when camping, the Ecomat 2000 switches off automatically when it tips over.Can be connected almost anywhereMany campsites and boat moorings only have 500 W. No problem with the Ecomat 2000!SafeThere are no glowing components in the Ecomat 2000, so that the risk of fire is greatly reduced.Very quietAlso suitable for continuous operation and, thanks to the metal housing, without unpleasant odours.
The USB-C/USB-A 3.0 SuperSpeed adapter enables a fast, straightforward connection between USB-C devices and conventional USB-A ports. This allows you to connect your devices flexibly and reliably – anytime and anywhere.
MT inverters are "Made in Germany" and guarantee an optimal 230 V supply from the RV battery – anywhere and at any time.Inverters of the MT series operate as pure sine wave inverters and are consequently suitable for even the most sensitive energy consumers on board (e.g. coffee machines by Saeco, Jura, Senseo, etc.). Even modern vacuum cleaners with sensor control and highly sensitive receivers can be operated easily and unrestrictedly. The MT 600 SI-N is already sufficient for operating TV/SAT, video units, DVD, computers or battery chargers. For larger energy consumers, inverters with 1200 W or 1700 W are available.All units are capable of handling overloads and are equipped with whisper fans as well as monitoring and shutdown functions. The operating unit with display options can be removed and mounted inside the vehicle as a remote control. An integrated load detection turns the units to energy-saving mode while they are not needed, or completely off, if need be. The larger inverters are also available with an integrated mains switching function. Via this function, the inverter detects whether external shore power is available and switches accordingly. As long as shore power is available, the inverter remains switched off and the interior sockets are supplied with shore power. If no shore power is available, the inverter can be activated and then, the same sockets are supplied with power by the inverter.All inverters are delivered ready for connection with integrated socket and battery cable (1.2 m).Input voltage: 10.5 V up to 15 VOutput voltage: 230 V AC/50 Hz, quartz-stabilised
This special cable ensures that all N-BUS-compatible convenience devices on board your vehicle are connected to each other in a common network. This allows you to monitor or control your devices through a single interface. The devices, in turn, can exchange their data with each other, ensuring better energy management.
Variants from €4.50*
Short-term peak power 1200 W; outputs (8): 3 x AC, DC, 2 x USB-A, 2 x USB-C.
With positively driven strain relief, soldering contacts for the connection to 8 A supplementary devices of all kinds, suitable for all standard sockets according to DIN ISO 4165.
Recessed standard socket with cover. Fastening with hexagon nut. Suitable for standard and universal plugs. Inner diameter: 12 mm.
The combi inverter with integrated charger was developed for the motorhome sector and combines all important functions in a compact, lightweight device. External components, additional wiring and separate fuses are eliminated, significantly simplifying installation and saving on materials and labour time. Advantages include the integrated mains priority switch, a 16-20 A fuse with RCD protection, an illuminated display with adjustment options, CAN bus connection, AC connection with Wago Winsta, tool-free restoration of the 230 V AC circuit, possible underseat installation, integrated short-circuit protection and durable components. The device offers high safety, space-saving installation and reliable power supply.
Enables the operation of the alarm system and the central locking system in combination with the WiPro III safe.lock. Protected by 4 billion changing codes, the vehicle can be securely locked/unlocked.
Inverter with charger, specially developed for large motorhomes: with this compact inverter/charger combination, you are prepared for all eventualities while camping. The device combines a sine wave inverter with an automatic charger. This allows you to easily operate powerful 230 V devices even at poorly secured campsites while simultaneously charging the RV battery.
The digital built-in control panel for monitoring the interior of the inverter/charger units ICC 1600/3000 offers many adjustment options. The display shows charging current, voltage, battery temperature and the current charging status. Depending on the operating mode, the connected ICC can also be turned on/off or switched to night or eco mode. Additionally, it is possible to individually adjust the input current limit to match the existing protection of the external 230 V power supply.
Sine wave inverter plus automatic charger
The integrated network switching automatically switches to the power grid as soon as it is available.
The PowerBoost function temporarily draws additional power from the RV battery.
With control unit for installation in the interior (remote control)
Compact combination of two devices – saves space on board
Quiet night mode programmable
High operational safety – protection against overload and overheating
Variants from €1,695.95*
The 5-core cable set is used to connect and extend item no. 303/041, item no. 303/045, item no. 300/090 and item no. 300/089 with matching plug connections.
This cable set is suitable, for example, for connecting an inverter to a battery. The set includes one red and one black cable with a cross-section of 25 mm² and is equipped with M8 connectors. Outer material (insulation) TM2. Cable type: ELFLEX.
Temperature sensor (cable approx. 1.5 m) for the charging unit LBC 512-10s.
The adapter allows the operation of devices with large plugs in small DIN sockets. Rigid model. Inner ø 21 mm for cigarette lighters.
Adapter for power supply with large plugs ø 21 mm in smaller DIN sockets, inner diameter 12 mm.
Pleasant heat for caravans, boats, conservatories and homes.The Ecomat can be operated at three different power levels (450/750/1800 W with fuses of 2/4/10 A) and can therefore also be connected to weakly fused lines. The temperature is infinitely variable via the electronic thermostat.Ceramic heating elementThe PTC heating element generates pleasant convection heat and does not dry out the air.Frost monitor functionReliably keeps the temperature above freezing and prevents frost damage.Automatic switch-offWhether at home, on a boat or when camping, the Ecomat 2000 switches off automatically when it tips over.Can be connected almost anywhereMany campsites and boat moorings only have 500 W. No problem with the Ecomat 2000!SafeThere are no glowing components in the Ecomat 2000, so that the risk of fire is greatly reduced.Very quietAlso suitable for continuous operation and, thanks to the metal housing, without unpleasant odours.
Many Euro 5 and almost all Euro 6 vehicles are equipped with an intelligent alternator. The function of 12 V isolating relays and D+ simulators is now only partially possible. A charging booster or BCB must be installed for charging the RV battery/batteries. After the engine stops, the relay disconnects the starter and the RV battery. Switching current (max.) 70 A.
The SinePower DPSI series sine wave inverters generate a pure sine voltage, suitable even for sensitive 230 V devices. Thanks to their wide input voltage range, they are also compatible with modern Euro 6 vehicles with intelligent alternators. Optionally, you can combine the inverter (from DPSI 612) with the TD283 multifunctional display instead of the remote control included in the delivery. It also works with the Dometic Power App (from DPSI616) – provided there is at least one Bluetooth®-enabled device in the network (TEMPRA battery or TD283 display in combination with a Dometic solar controller).
Variants from €139.00*
The intelligent boiler control. An advanced yet extremely user-friendly device for managing boilers. It allows complete control over water heating – both locally via physical buttons and remotely via smartphone and web browser. The ideal solution for anyone who values comfort, energy savings and integration with PV systems (photovoltaics) or battery power.
Recessed socket IP54 with cover. Operating voltage: 12 V/24 V DC, output power: 5 V DC, 3.6 A. Integrated voltage converter. Ideal for charging USB-enabled devices with high charging current requirements.
The SinePower DPSI series sine wave inverters generate a pure sine wave voltage, which is suitable even for sensitive 230 V devices. Thanks to their wide input voltage range, they are also compatible with modern Euro 6 vehicles equipped with smart alternators. Optionally, you can combine the inverter (from DPSI612 onwards) with the multifunctional display TD283 instead of the included remote control.
Variants from €139.00*
This sine wave inverter is designed to convert 12 V or 24 V battery power into pure 230 V/50 Hz alternating current. This ensures the reliable operation of electrical devices up to 1800 W using power from the vehicle battery. Special highlights of this premium product include the intelligent mains priority switching (voltage synchronisation) and an energy-saving smart standby mode. Combine the inverter with an elegant control panel for convenient operation and a clear overview or with the TD283 multifunctional display. It also works with the Dometic Power App – provided there is at least one Bluetooth®-enabled device on the network (TEMPRA battery or TD283 display in combination with a Dometic solar controller).
Priority switching: integrated mains priority switching with voltage synchronisation
Certification mark: E-certified (EMC vehicle regulations)
The Lithium Battery Power Set is the optimal combination for motorhomes or vans. Use the set to switch to lithium batteries or to equip your new vehicle with them right from the start. The combination of the individual components guarantees constantly full capacity and safe operation in all climate zones and all year long.The set is designed in such a way that it works as an independent system, but can also be connected in parallel to existing on-board electronics. It consists of a lithium RV battery MT Li 85, MT Li 105 or MT Li 120 in combination with a charger/booster combination and a battery computer (MT iQ Basic). All devices were developed by Büttner Dometic and are optimally geared to each other. The charger/booster combination unit (BCB 25/20) supplies the battery with charging current (20 A) if there is a 230 V mains supply and automatically switches to booster charging (25 A) while driving. In both charging situations, the device receives information directly from the lithium battery, so that it can optimally charge it. Additionally, the battery computer monitors the battery and displays battery capacity (in % and Ah), current consumption (A) and the remaining time inside the vehicle.The set includes a ready-to-plug-in installation cable set for the battery computer as well as a cable set for integrating the charger/booster combination unit into existing on-board electronics.
Variants from €1,731.95*
New
The device is compatible with lithium, gel, wet, SLD and AGM batteries and is suitable for residential homes as well as mobile power supply systems. The switching time of 20 ms allows for an almost uninterrupted power supply. A 4-stage charger with adjustable charging current up to 150 A, Bluetooth for monitoring via the Renogy app, as well as an RCD and multi-stage protection functions complete the features.
Flat power USB socket with integrated voltage transformer. For charging and operating electronic devices that can be charged via 5 V/3000 mA USB. Incl. fastening screws, overload protection, overtemperature protection, polarity protection.
With the FLY 2.5 mm² PVC vehicle cable (NO7V-K), you can determine the required cable length yourself – ideal for flexible applications such as connecting batteries, inverters or battery chargers. Simply cut to the desired length and perfectly tailor it to your needs.