Content: 100 Stck (€0.10* / 1 Stck)
New
With the EcoFlow Alternator Charger Plus 1000, you can efficiently charge your power station via the vehicle alternator while driving. The additional 300 W solar input provides greater flexibility and energy independence when camping, enjoying vanlife or travelling. The integrated ignition cable supports safe control of the charging process in the vehicle.Scope of delivery: EcoFlow Battery Charger Plus 1000, alternator input cable with integrated ignition cable, XT150 output cable, 125A fuse cable, mounting material, user manual and warranty card.
This special cable ensures that all N-BUS-compatible convenience devices on board your vehicle are connected to each other in a common network. This allows you to monitor or control your devices through a single interface. The devices, in turn, can exchange their data with each other, ensuring better energy management.
Variants from €4.50*
This cable set is suitable, for example, for connecting an inverter to a battery. The set includes one red and one black cable with a cross-section of 50 mm² and is equipped with M8 connectors. Outer material (insulation): TM2. Cable type: ELFLEX.
The USB-C™/USB-A 3.0 OTG SuperSpeed adapter allows you to quickly and straightforwardly connect USB-A devices and USB-C™ ports.
This ventilation system is ideal for RV HVAC systems, dryers, greenhouses and more, as it transports fresh air for heating and cooling purposes. It offers intelligent speed control with 6 manual levels, automatic temperature control and a timer. The fans switch off below 20 °C and automatically adjust their speed between 20 °C and 45 °C. Above 45 °C, they run at maximum speed. With an IP55 certification, it is waterproof and suitable for all environments. Incl. two steel pipe clamps for ø 60 mm pipes and rectifier.
New
Battery charger for charging compatible power stations via the alternator while driving. Suitable for the EcoFlow RIVER and DELTA series as well as partially for third-party power stations with XT60 connection. Compatible with petrol, diesel, hybrid, and partially plug-in hybrid vehicles.
Max. charging power 600 W. Input 11 – 31 V/45 A, output 40 – 60 V/12 A. With protection functions against reverse polarity, overcurrent, short circuit, as well as over- and undervoltage. Protection class IP4X, noise level < 40 dB, operating temperature -10 °C to +45 °C.
Scope of delivery: Alternator Charger 600, alternator input cable with integrated ignition cable, XT60 output cable, 125 A fuse cable, mounting material, user manual and warranty card.
Nominal cross section 6.0 mm² (4), Clamping range 2.5 – 4.0 mm², 12-pin. Open and captive contact screws, 450 V; for temperatures up to 85 °C.
This special cable ensures that all N-BUS-compatible convenience devices on board your vehicle are connected to each other in a common network. This allows you to monitor or control your devices through a single interface. The devices, in turn, can exchange their data with each other, ensuring better energy management.
Variants from €4.50*
Qi2 15 W wireless charging: enjoy the convenience of 15 W wireless charging, which is twice as fast as charging with Qi1 7.5 W – with Qi2 certification for fast, safe and efficient charging.
Ultra-fast charging with integrated 30 W/65 W cable: thanks to the integrated 30 W/65 W cable, no additional cable is required for fast charging. Experience the magnetic ease of maximum charging speed wherever you go.
Rapid charging: with a power output of 30 W/65 W and a charging time from 0% to 70% in less than 33 minutes, you can quickly be on your way.
Integrated stand for versatile use: the stand offers both an upright and a side viewing mode, enables hands-free use and also serves as a table stand.
Smart digital display (only 10,000 mAh): experience ultimate control with the dynamic display of this power bank. With smart app control, you can view the charging speed as well as the energy delivered and even personalise your display.
Smart app control (only 10,000 mAh): in addition to more detailed information about the charging process, you can activate the "Healthy Charging Mode" to extend your battery's service life. If you lose your power bank, you can locate it using the built-in buzzer.
Variants from €69.95*
Blade-type fuse set Micro 2 for many common vehicle types, 8 pieces. Contains one fuse each of 3/5/7.5/10/15/20/25/30 A.
Automatic fuse for caravan and boat. Manually resettable. Serves as protection of the on-board mains and the consumer. Commercial fuses can simply be replaced by this fuse.
Short-term peak power 3600 W; solar input 1000 W; outputs (11): 4 x AC, 2 x DC, 2 x USB-A, 2 x USB-C, car.
The USB-C/USB-A 3.0 SuperSpeed adapter enables a fast, straightforward connection between USB-C devices and conventional USB-A ports. This allows you to connect your devices flexibly and reliably – anytime and anywhere.
This special cable ensures that all N-BUS-compatible convenience devices on board your vehicle are connected to each other in a common network. This allows you to monitor or control your devices through a single interface. The devices, in turn, can exchange their data with each other, ensuring better energy management.
Variants from €4.50*
Short-term peak power 1200 W; outputs (8): 3 x AC, DC, 2 x USB-A, 2 x USB-C.
Enables the operation of the alarm system and the central locking system in combination with the WiPro III safe.lock. Protected by 4 billion changing codes, the vehicle can be securely locked/unlocked.
The 5-core cable set is used to connect and extend item no. 303/041, item no. 303/045, item no. 300/090 and item no. 300/089 with matching plug connections.
This cable set is suitable, for example, for connecting an inverter to a battery. The set includes one red and one black cable with a cross-section of 25 mm² and is equipped with M8 connectors. Outer material (insulation) TM2. Cable type: ELFLEX.
Temperature sensor (cable approx. 1.5 m) for the charging unit LBC 512-10s.
Many Euro 5 and almost all Euro 6 vehicles are equipped with an intelligent alternator. The function of 12 V isolating relays and D+ simulators is now only partially possible. A charging booster or BCB must be installed for charging the RV battery/batteries. After the engine stops, the relay disconnects the starter and the RV battery. Switching current (max.) 70 A.
The intelligent boiler control. An advanced yet extremely user-friendly device for managing boilers. It allows complete control over water heating – both locally via physical buttons and remotely via smartphone and web browser. The ideal solution for anyone who values comfort, energy savings and integration with PV systems (photovoltaics) or battery power.
Recessed socket IP54 with cover. Operating voltage: 12 V/24 V DC, output power: 5 V DC, 3.6 A. Integrated voltage converter. Ideal for charging USB-enabled devices with high charging current requirements.
With the FLY 2.5 mm² PVC vehicle cable (NO7V-K), you can determine the required cable length yourself – ideal for flexible applications such as connecting batteries, inverters or battery chargers. Simply cut to the desired length and perfectly tailor it to your needs.
The cable reel 4 mm² (FLY 4 mm² PVC vehicle cable NO7V-K) offers versatile applications, e.g. for connecting batteries, inverters or battery chargers. The flexible cable can be cut to size individually, thus perfectly adapting to your requirements. Ideal for applications where precise adjustments are necessary.
The digital control panel for interior monitoring of the inverter/charger combinations ICC 1600 and ICC 3000 with various setting options. The display shows charging current, voltage, battery temperature and charging status. Depending on the operating mode, the connected ICC can be switched on and off or put into night mode/Eco mode. Additionally, it is possible to adjust the input current limit to the existing fuse protection of the interior 230 V mains input. This prevents the fuse from being tripped if your parking spot is only weakly fused.
The FLY 1.5 mm² PVC vehicle cable (NO7V-K) is ideally suited for electrical installations in vehicles and versatile wiring projects. Thanks to its fine-stranded and flexible nature, it is easy to install. With a robust PVC insulation, it ensures a reliable power supply and durability. The cable is supplied in a convenient 100-metre reel, providing ample material for a variety of applications.
The main tasks of the Victron battery monitor are to measure the charging and discharging currents and to calculate the state of charge and the remaining battery life. If certain limits are exceeded (such as excessive discharge), an alarm is sent out. The battery monitor can also exchange data with the Victron Global Remote. This also applies to the sending of alarms.
The FLY 1.5 mm² PVC vehicle cable (NO7V-K) is ideally suited for electrical installations in vehicles and versatile wiring projects. Thanks to its fine-stranded and flexible nature, it is easy to install. With a robust PVC insulation, it ensures a reliable power supply and durability. The cable is supplied in a convenient 100-metre reel, providing ample material for a variety of applications.
The Solara charge controller SR85TL is the perfect solution to efficiently and gently charge your batteries. With a regulated charging characteristic specifically tailored to the respective battery type, this single-circuit controller ensures maximum reliability and modern technology at minimal cost.
The universal cable with a cross-section of 70 mm² is required for connecting batteries, inverters or battery chargers. The colours can be used to distinguish the poles. With the 10 m cable, you can decide for yourself what length you need. Outer material (insulation) TM2. Cable type: ELFLEX.
The battery pack AP18650 includes a standard 18650 Li-Ion 3.7 V/2.5 Ah battery for reliable performance. It can be conveniently and quickly charged via USB-C. The 18650 Li-Ion battery is the perfect companion for mobile applications, ensuring that your devices are always ready for use. With integrated charging and discharging intelligence.
The 175 A high-current fuse set complements the existing wiring kit and provides additional protection against overloads or short circuits. Ideal when additional consumers or longer cables need to be protected.
Base plate for surface mounting suitable for mounting on flammable surfaces.
With the FLY 2.5 mm² PVC vehicle cable (NO7V-K), you can determine the required cable length yourself – ideal for flexible applications such as connecting batteries, inverters or battery chargers. Simply cut to the desired length and perfectly tailor it to your needs.
Short-term peak power 3600 W; outputs (13): 4 x AC, 2 x DC, 2 x USB-A, 2 x USB-A Fast Charger, 2 x USB-C, car.
Base plate for surface mounting suitable for mounting on flammable surfaces.
Variants from €3.30*
The TBB Power MEH-B Power battery monitor displays all important battery data at a glance. It enhances the batteries with app control via Bluetooth. Additionally, the battery can be turned on and off using a remote switch. ONLY for TBB M12 batteries.
Recessed socket IP54 with cover. Operating voltage: 12 V/24 V DC, output power: 5 V DC, 3.6 A. Integrated voltage converter. Ideal for charging USB-enabled devices with high charging current requirements.
Variants from €28.95*
Absolutely waterproof and corrosion-protected compression latch. The latch pulls the door to the seal with a clamping distance of 6 mm if you turn the handle 180 degrees. For door leaf thicknesses between 26 – 45 mm. Supplied with mounting plate and bolt. Locking cylinder insert made of metal for STS plug-in cylinder.
High-quality design with high tensile strength, flame-retardant, durable and resistant, UL-tested, UV-stabilised. Bag packaging with Euro perforation – ideal for shop sales.Operating temperature: -40 °C, 85 °CAssembly temperature: -10 °C, 60 °C.
Variants from €4.95*
Multi-port: charges up to 3 devices simultaneously via 2 USB-C and 1 USB-A port.
65 W fast charging: perfect for MacBook Pro 14, Samsung S24 Ultra or Google Pixel Book.
Compact: 48% smaller thanks to GaN technology.
Universally compatible: for smartphones, tablets and USB-C laptops such as MacBook Air/Pro, ThinkPad, Surface.
Scope of delivery: charger, 100 W USB-C cable, manual, 18 months warranty.
This cable set is suitable, for example, for connecting an inverter to a battery. The set includes one red and one black cable with a cross-section of 70 mm² and is equipped with M8 connectors. Outer material (insulation): TM2. Cable type: ELFLEX.
The universal cable with a cross-section of 70 mm² is required for connecting batteries, inverters or battery chargers. The colours can be used to distinguish the poles. With the 10 m cable, you can decide for yourself what length you need. Outer material (insulation) TM2. Cable type: ELFLEX.
The VOTRONIC D+ Simulator Pro is the ideal solution for vehicles with energy-optimised alternator control (e.g. Euro 6). It generates the D+ signal independently of alternator operation by detecting engine vibrations. An adjustable shut-off delay ensures reliable function during start-stop operation, while the integrated charging voltage monitoring prevents false activations caused by external vibrations. With a consumption of less than 3 mA and support for 12 V and 24 V systems, it is perfect for modern vehicles.
The DELTA Pro 3 power stations for indoor and outdoor use are particularly powerful and therefore perfect for both at home and outings. Thanks to the wheels, the power station is easy to transport, allowing you to power your devices effortlessly. Thanks to the various outputs, it can be adapted to all your devices – be it a mobile phone, a laptop or a household appliance. With X-Stream technology, the models can be charged from 0 to 80% in just one hour. At home, the batteries of the DELTA Pro 3 series transform into eco-friendly backup power supplies. Thanks to the high storage capacity, you can power your devices at home for several hours in the event of a power outage – with renewable energy.
Short-term peak power 8000 W; outputs (11): 5 x AC, 2 x DC, 1 x CEE, 2 x USB-A Fast Charger, 2 x USB-C.
Scope of delivery: EcoFlow DELTA Pro 3 portable power station, quick guide, safety instructions, EcoFlow AC charging cable, handle protector.
The cable set can be used to connect an inverter to a battery. It includes a red and a black cable with a cross-section of 35 mm² and is equipped with M8 connectors that allow for a simple and secure connection.Thanks to the colour coding, the set makes it easy to identify the positive pole (red) and the negative pole (black), ensuring reliable power transmission. Outer material (insulation): TM2. Cable type: ELFLEX.
The universal cable with a cross-section of 25 mm² is required for connecting batteries, inverters or battery chargers. The colours can be used to distinguish the poles. With the 10 m cable, you can decide for yourself what length you need. Outer material (insulation): TM2. Cable type: ELFLEX.
Wall plate for integration into Berker's switch programmes. (Compatible with all USB built-in charging devices from Wentronic.)